Spinal Tap? Anyone?
I
found out on a training ride the Continental Contact tires that come with the LHT
(yeah you know me) spew out a ton of dust on dry dirt trails like the C&O Tow Path. After a 55 mile ride I was covered in dust and annoyance. After consulting with
the LHT&CC google group I decided that a mudflap was just what I needed. However, for something so simple they can be pretty expensive, and I thought I could make one ten different ways out of stuff lying around the house. One way rose to the top, making one out of old mountain bike tubes and glue.
It was pretty simple, I cut open a tube and lay it flat cutting out two sections of similar length and gluing them together. I used one of those dual compound super glues and it seems to work fine. Once it was fully dry I cut the jagged messy edges off and it looked pretty good. Another option might be to use tire patch glue.
Next up, using
my Dremel I drilled two small holes in the fender to attach the mudflap. I made the holes as small as I could and far enough from the edges that they wouldn't weaken the fender itself.
Finally I fastened the mudflap to the fender with a small zip tie. I made sure to face the mudflap outward so the curve of the tubes matched that of the tire.
After riding it in this morning I think I may add third or maybe even forth layer of rubber to stiffen the mudflap. It was flapping a bit at high speed.
UPDATE:
I added two more layers of rubber and it seems to work perfectly.
What did the hand say to the Monday?
SLAP!